For more information or advice call us on
Tel: 01384 76961
5000kg A-Frame Lifting Gantry
Our largest capacity A-frame gantry has a Safe Working Load of 5000kg. We use much larger steel for this model in order to attain the safe working load limit.
Welded with precision by our skilled fabricators here at Lifting Gear Direct you can be assured of high quality gantry systems, easily capable of lifting 5000kg.
We can fit the 5000kg a-frame with extra heavy duty castors for mobility or plated feet for semi-permanent positioning. The plates are bolted down to the ground, though are easy enough to remove when required.
If not used with bolted down plated feet and using on irregular height flooring we can add parking jacks to allow minor height adjustments to counteract any imbalance.
If you will be using any electrical equipment on this A-frame then we can add a festoon wire to safely hold the cables and also an isolator switch for emergency situations.
The 5000kg A-frame gantry has some maximum height and span dimensions that are allowed. The height is to the underside of the beam and available up to a maximum of 5 metres. The span is the measurement of the beam inside the legs / side frames, which is also 5 metres maximum. Therefore the maximum internal measurement of the gantry is 5 x 5 metres, so if you need the total width and height due to size restrictions the size of steel used will also need to be taken into consideration to determine to overall dimensions.
Please contact us for more information.
Catenary systems, knock out boxes, festoons, parking jacks and all types of lifting equipment are all available to further enhance your A-frame gantry system.