For more information or advice call us on
Tel: 01384 76961
Demag DCS-pro Electric Hoist
The Demag DCS Pro Electric Hoist has great versatility and incorporates a variable speed system which works like a car accelerator. A gentle push of the button and the lift will rise slowly, push down harder and you will increase the speed. Plus with its pro-hub function, reduced loads can travel up to 90% quicker. Depending on the model/size chosen, the creep speeds start from 0.15m/min and the maximum lifting speeds go up to 30m/min.
Key Features of the Demag DCS Pro Electric Hoist
Along with the excellent variable speed as mentioned above, the Demag DCS pro electric hoist incorporates many other features which improve usability.
The fine control permits gentle starting of the lift and fine positioning of the load, this can be very beneficial for finer bench work tasks and production lines, especially if used in combination with the DCMS Manulift controls. The fine controls also optimize the control pendant ergonomics.
A further benefit is that prior to the hook reaching either the upper or lower limiters the hoist will automatically switch to a slower speed for extra safety. You get low vibration and swaying of the load with the DCS pro hoist due to the breaking & acceleration ramps; these, along with the lifting speed parameters may be modified using the control unit if necessary.
The complete control system, as well as the frequency inverter comes as a compact module which is located under the electric equipment cover for good accessibility and safety. These units are reliable and safe due to the 24v control with the added benefit of operational limit switches. There is a slip clutch which provides the overload protection, this is speed monitored for additional security.
- Easy to install and set up
- Fast control pendant height adjustment – no extra wiring necessary.
- Diagnosis interface with time counter (elapsed)
- Easy access to plug connections. (pivotal service cover).
- The chain drive is easy to change (motor & gearbox don’t need to be removed)
- Up to 10 years maintenance free for the clutch, brake and gearbox.
- Wide operational temperature range (-20 - +45 degrees)
Overall the DCS pro electric hoist offers high safety rates whilst in use with high efficiency. Lifting Gear Direct can supply the complete range of these trusted electric hoists, with lifting capacities going up to 3200kg. Please do not hesitate to get in touch if you need more information.