For more information or advice call us on
Tel: 01384 76961
IMER ES 150 N Scaffold Hoist
The Imer ES 150 N scaffold hoist is capable of lifting loads of up to 150kg, and is capable of lifting speeds of an average 19 metres per minute when fully loaded.The total amount of workable height is 30 metres due to its 31 metre wire rope, which is 5mm in diameter. The wire rope terminates in a robust steel load hook complete with a safety catch for extra load protection.
The Imer ES 150 N has a robust framework to hold the working hoist stable, the hoist's frame is simple to attach to the scaffold pole with the special purpose clamps, and just as easy to remove and re-locate as necessary.
This is the smallest scaffold hoist in the Imer range and weighs in at 30kg. Perfect for use around the construction site where scaffolding is present. We have numerous accessories available to further enhance your Imer scaffold hoist, from wheel barrow slings, buckets and window props, to extensions, lifting hooks and bucket carriers.
This scaffold hoist is most convenient for lifting applications that will not need the frame to extend, if you require an extendible frame try the model ET 150 N.
IP67 rated plug
There is a trolley system available if you wish to use this hoist with a gantry frame.
The Upper limit safety device helps to prevent overloading
The direct control pendant has 3 push type buttons
The control pendant is IP65 rated and has a 1.5 metre cable.
2 x robust scaffold Clamps
Self-braking motor with magnetic brake rectifier