The TEA L’Europea builders hoist needs a gantry framework as its anchor point, this framework enables the builders hoist to hang over the edge of a building perhaps; in order to lift up materials. The construction and building industries have been using these builders hoists for over forty years and therefore have an excellent reputation around the building sites. TEA L'Europea also manufactures a gantry frame with the option of ballast boxes. Ballast boxes fit to the rear of the gantry frame to counterbalance the weight of the hoist and the load being lifted and can be filled with suitable substances accordingly.
Lifting Gear Direct can supply 5 different models of the TEA L’Europea builders gantry hoists; there are three single phase models (MF) and two three phase models (TF), with a range of lifting capacities including 300kg, 500kg and 800kg. We can also supply a range of accessories for these gantry hoists, please see our Scaffold hoist and gantry hoist accessories page here.
Conforming to all the necessary regulations, TEA L’Europea builders hoists are the perfect solution to lifting on a construction site when there is no scaffolding available.
With a 300kg capacity, a 25-metre cable and a 1100W engine, the HE 300 MF can lift loads at average speeds of up to 23 metres per minute. It is a fairly lightweight and compact bit of kit in its own right, with simple pendant controls and TEA’s innately resilient build quality to offer users.
For this hoist the load capacity rises to 500kg, while a similar onboard motor means that the average speed is lowered to 11.5 metres per minute. Its standard 25 metre cable can be swapped out for a replacement with up to 35 metres of length available.
Unlike its similarly capable sibling, the HE 500 TF is not limited by its load capacity when it comes to lifting speed. It can hit 29 metres per minute in a typical work cycle and uses a thicker 7mm steel cable to keep half-tonne loads safe and secure.
With even greater load-carrying capabilities, the HE 800 MF takes things one step further thanks to its 800kg working load limit. Again the lifting speed sits at 11.5 metres per minute, while the 60kg weight of the hoist itself is impressively light, ensuring that it is easier to attach it to the gantry frame that will play host to it during its lifting duties.
This hoist blends 800kg of load-lugging might with a quicker 14.5 metre per minute average lifting speed, which it can reach even when close to capacity. It is the largest and most powerful of the TEA L’Europea range that we stock, although you can check out our full line up of gantry hoists if you have different needs to be met.
If you have a question concerning any of our gantry hoist products, or want to get a quote for the TEA models we sell, please get in touch with LGD. Reaching us is as simple as calling 01384 76961 or emailing via our contact form to get a reply from an expert in lifting equipment of all types.