The High Spec, Yale Lodestar electric hoist is well known throughout the lifting industry for its excellent, heavy duty lifting abilities. This robust electric hoist is up to even the most demanding lifting tasks through combining high duty cycles with long lifting heights. The Yale Lodestar hoist can be utilized with its fixed hook suspension or mounted to a trolley for additional versatility.
Made in the USA, the Lodestar electric hoist incorporates many features as standard to ensure it is suitable for the majority of heavy duty lifting operations in any industrial setting.
The housing covers are made from a light yet robust aluminium alloy; the housing completely encase all mechanical and electrical parts to protect from damage whilst also enabling the efficient dissipation of internal heat. The cover can be removed for easy access to all parts for servicing, maintenance and repairs etc.
Limit switches provide additional protection by preventing over travel which can be dangerous and damaging. The upper and lower limiters are pre-set in the factory; however they can be easily adjusted to suit your needs, please refer to the manufacturers instructions on how to do this.
The compact dimensions of the Lodestar make it suitable for use in more confined spaces.
The hoist motors are 3 phase and single speed with dual operating voltages of 230v or 110v (1ph – 50Hz); some models are available in 400v 3ph 50Hz operating voltage.
Maintenance is easy and minimal, this is thanks in part to the gearbox which has been lubricated for lifetime efficiency.
Lifting Gear Direct can supply the Yale Lodestar electric hoist in a range of lifting capacities starting from 250kg right up to 3000kg. With the standard hook suspension hoist also being available with a push travel trolley or electric trolley for your convenience.
With FEM classification 2m the duty cycle results in higher productivity (50% duty – 30 minutes continuous use per hour).
The control operates at 48 volts with IP65 protected pendant control. The hoist is IP54, and the motor has an H4 classification.
The load hook incorporates axial bearings and is ideal for long heights of lift
Thermal overload protection comes as standard on the Lodestar hoist so you can be assured of optimum safety at all times.
Please refer to the tables below for the technical specifications and dimensions; Not sure which electric hoist will be best for you? call our sales team on 01384 76961 if you need more information. You can also use the rapid enquiry button for a quick quotation, this is ideal if you know exactly what you need. To email us you can use the contact us page here.
We can also supply other Yale electric hoists with other lifting capacities, the CPE has WLL up to 10 tonne, the CPV up to 5000kg and the little CPS up to 250kg. The CPE and CPV also have models which incorporate integral trolley systems.
|Model||Operating voltage||Capacity (WLL) kg||Falls of load chain||Lifting speed(s) m/min||Load chain depth x pitch (mm)||Hoist motor (kW)|
||230V or 110V 1 Ph 50Hz||250||1||8||6.3 x 18.9||0.37|
||230V or 110V 1 Ph 50Hz||500||1||4||6.3 x 18.9||0.37|
||230V or 110V 1 Ph 50Hz||500||1||8||7.9 x 21.7||0.75|
||230V or 110V 1 Ph 50Hz||1000||1||4||7.9 x 21.7||0.75|
||400V 3 Ph 50Hz||1000||1||8||7.9 x 21.7||0.75|
|LL2||400V 3 Ph 50Hz||1000||1||8/2.5||7.9 x 21.7||0.75|
||230V or 110V 1 Ph 50Hz||2000||2||2||7.9 x 21.7||0.75|
||400V 3 Ph 50Hz||2000||2||4||7.9 x 21.7||0.75|
|RR2||400V 3 Ph 50Hz||2000||2||4/1.3||7.9 x 21.7||0.75|
||230V or 110V 1 Ph 50Hz||3000||3||1.33||7.9 x 21.7||0.75|
|Model||Lodestar 250/500||Lodestar 500/1000||Lodestar 2000||Lodestar 3000|
|Frame type||A, B, C, F and AA||J, L, JJ and LL||R, RR||RT, RRT|