These builders hoists have been specially designed with construction workers in mind. They not only help with lifting the materials to the required area they help with the unloading too. If you need a hoist to attach to a scaffold pole instead of a gantry then check out our scaffold hoists which forms part of our extensive hoist range.
The Airone is specially configured for easy installation due to better weight distribution; it incorporates a telescopic arm which can extend to 1100mm with the added bonus of the lifting capacity remaining the same whether it is fully extended or not at all. In addition the arm raises the position of the load hook which helps considerably when unloading materials; they make it easier to pass objects through windows for example.
Incorporating a positioning lever the Airone is easy to position with more precision. There is an upper limit device for extra safety and has an IP65 direct control pendant with a 1.5 metre cable. The self braking motor has a magnetic device and an IP67 plug. There is a pre-arrangement for all supports (not gantry) on the 200N model.
The special prop and ballast container seen in the pictures are optional accessories and often recommended. The Airone 300 new has the possibility to add an optional column prop with a maximum capacity of 300 kg. There are many other gantry hoist accessories available to further compliment this type of hoisting system; you can view our full scaffold hoist accessories range here.
If you have a question regarding the Aironebuilders gantry hoist or any other hoisting product we supply then don’t hesitate to call us on 01384 76961, we are always happy to help where we can. Quotations are usually supplied quickly and are always at the lowest possible prices. Email queries can be sent here. Remember we also offer servicing, repairs and thorough inspections to comply with the LOLER regulations.
|Airone 200 N||Airone 300 New|
|Av. Full load lifting speed||m/min||19||19|
|Max. Working height||m||30||30|
|Wire rope diameter||mm||5||5|
|Motor power rate||kW||0.75||1.1|
|Motor running current||A||7.5||10|
|SPL in operator position||dB(A)||72||72|
|packing dimensions w/l/h||mm||330/850(1100)/625||330/850(1100)/625|