Securely mounted to either existing or newly poured foundations these Demag pillar mounted jib cranes will stand the test of time. As with all lifting equipment they do require a thorough inspection at regular intervals to comply with LOLER and the HSE. Lifting Gear Direct have LOLER accredited trained inspectors who can carry this out at your convenience.
With more than 10 models available in this range, there should be a lifting capacity to suit your needs. Depending on the safe working load you require there will be a good choice of outreach lengths to choose from. If you pick a SWL between 125kg & 3200kg then your choice of reach can be anything up to 12 metres. The larger capacity models will have less reach; you can find out just how long you can have your reach in the table below.
Because these jibs are pillar mounted then can fully rotate through 360 degrees with the option of manual or powered drive and radio controlled system. If at any time you need to limit the slew a limiting device can easily be added; they can be adjusted to suit your rotational requirements. This swing jib system is also available in a wall mounted version.
When you purchase a new crane system it is often the case that you will also need auxiliary equipment in order to complete any lifting application. Lifting equipment comes in many forms and it can be confusing to decide what you need. For a jib crane you will most likely need a beam trolley, a hoisting device and then perhaps some lifting slings and shackles for attaching the load. All of these items can be purchased together from Lifting Gear Direct at some of the cheapest prices around, so why look elsewhere when you can get all you need from one place.
Simply call 01384 76961 to speak to our sales team; alternatively use the contact page or rapid enquiry form to email us your details.