This webbing puller is light in its overall weight which makes it easy to carry around; it is supplied in its own box which can be used for storage to keep the puller clean.
The web puller incorporates a load holding function to hold an item in position as required. This function can be used in both forward and reverse modes. The orientation of movement is selected by a single click of the ratchet tab. This automatic brake operates at every notch.
The lever or handle has the ability to completely rotate through the full 360 degrees which not only makes it easy and efficient to use but it means it may be operated from almost any angle.
The webbing puller possesses a polyester web strap which has insulating benefits when clean and dry; along with the insulated handle which is a fibre reinforced plastic coating; electrical safety is increased and so is perfect for tensioning conductors and similar jobs.
This web puller has a 4:1 safety factor and is voltage tested to 15kV. The maximum length of pull with this webbing puller is 2000mm and the minimum is 420mm. There are 2 models available, a 1 tonne and a 1.5 tonne model.
Lifting Gear Direct supply many forms of lifting equipment, including items similar to this webbing puller, take a look at our wire rope cable pullers if you need something more robust, or view our full range of lever hoists. The hoisting equipment category is large and varied and includes a range of manual hoists and powered hoists, these may be powered by electric or air. To compliment hoisting devices we have a massive range of lifting slings and components, clamps, shackles and much more.
Contact us on 01384 76961 for a quick quote, help or advice; you can also email us here.
|Capacity ( tonne)
|Strap Size (mm)
|Lever Length (mm)
|Maximum Length (mm)
|Minimum Length (mm)
|2 x 33
|2.2 x 40
Tags: pull loads