With a 1000kg load capacity this workshop floor crane can handle many types of load, including car engines. This foldable floor crane takes up minimal floor space.
This workshop floor crane is the PDJ10 model and is easy to move around the workplace thanks to its tough polyurethane wheels, two of which swivel to aid steering. One particular advantage to the NDJ10 floor crane is that it can be folded to quite a compact size, thus its easy to move out of the way when more space is needed and can be stored neatly with minimal floor space taken up.
Once the floor crane has been unfolded the maximum lifting height will be 2350mm. Ensure the bottom legs will fit under the load. (i.e. car engine bay). The minimum beam height is 1650mm.
The crane features a hydraulic pump which is the double acting type and thus enables quick and safe lifting. The hydraulic pump incorporates a safety valve and chrome plated piston.
The top beam incorporates four positions from which lift from. These are set at specific increments and have different safe lifting capacities at each point.
The first point is set at 1160mm and the final lifting point is set at 1460mm and can handle the maximum 1000kg loads.
When folded down the crane will take up minimal floor space.
As well as the PDJ10 workshop crane we can also supply the Raptor SC engine crane which can handle heavier loads up to 2000kg, and also has 3 lifting positions.
Need something bigger? No problem, Lifting Gear Direct manufacture their own Swing Jib cranes and mobile lifting gantry systems and can be made to your specifications, so if you have the space and need extra lifting oomph then these types of crane will be worth a look.
| PDJ10 | |
| Lifting Capacity | 250kg to 1000kg |
| Beam Length Adjust-ability | 1160mm to 1460mm |
| Lifting Height | 2350mm |
| Wheels | 2x fixed front + 2x locking swivel rear |
| Unit Weight | 115kg |
POA Ex Tax:£340.34
