We sell high quality lifting equipment of all kinds, and in certain situations it is sensible to choose a magnetic lifting solution over a traditional alternative. The BUX BM2500 is excellent in manufacturing scenarios where high volumes of steel need to be handled safely, manoeuvred efficiently and controlled remotely. This might be in a factory, workshop or other environment where power and precision are important.
Although this product requires power to keep the magnet working, it does not need to be plumbed into a mains supply. The built-in battery pack takes care of this, making it incredibly simple to deploy and move without any hassle. Recharging is fairly swift and it should last for up to eight hours before it needs to be powered up again.
With the infrared remote working at distances of up to five metres, operators can stand well back, avoiding any potential dangers, while remaining in total control at all times. And because there is a bail sensor onboard, the magnet will remain active during load-bearing duties to avoid accidental drops.
If you are uncertain about any of our products, need additional info or just want some quick advice to point you in the right direction, Lifting Gear Direct will happily oblige. Either head to our contact page to email us, or call our hotline on 01384 76961 for instant assistance.
|Material Thickness (mm)||Surface Condition|
|Clean and smooth ground surface Air gap < 0.1mm||Rusty/hot rolled surface Air gap 0.1-0.3mm||Irregular and rough surface Air gap 0.3-0.5mm|
|Max dimensions LxW (mm)||WLL (KG)||Max dimensions LxW (mm)||WLL (KG)||Max dimensions LxW (mm)||WLL (KG)|
|H (mm)||Weight (KG)||Tested lifting capacity (KG)||Safe lifting capacity for flat material (KG)||Accumulator capacity (V/Ah)||Accumulator type (DIN)||Working time at 50% load (H)|