The CTP is suitable for fixing to any beam and the subsequent attachment of a hoist, pulley and/or load; this is due to the fact that the CTP integral travel trolley beam clamp is 2 in 1, a clamp and push trolley combined.
This beam clamp with attached trolley is quite easy to attach to a beam. Firstly you need to open up the trolley clamp by turning the spindle counter clockwise. Next you should fit the trolley over the beam flanges, resting one side on a flange. Now turn the spindle clockwise to pull the trolley in until the wheels on the opposite side come to rest on the flange, once in the correct position you must lock in place by turning the locking lever on the spindle clockwise. The trolley clamp is now ready for use.
Always ensure the load is suspended on the central, thinner part of the supporting pin and that it hangs vertically. Side pulling is not permitted. Remember to check for faults prior to each use and ensure it moves smoothly across the beam. Test and inspect all lifting equipment on a regular basis to comply with LOLER regulations.
There are many more beam attachments available from Lifting Gear Direct including standard beam clamps and a range of beam trolleys with prices that start from just over £43 for a basic push travel option. Geared travel trolleys and electric powered trolleys are also available, the choice is yours.
Contact the team should you require more info or advice. 01384 76961 is the number to call.
|Model||CTP 1-A||CTP 2-A||CTP 2-B||CTP 3-A||CTP 3-B|
|Model||Capacity KG||Beam flange width b mm||Curve radius min. m||Weight KG|