My Cart
Yale HTP Push travel Trolley

Yale HTP Push travel Trolley

The Yale HTP push travel beam trolley is a simple and easy to use beam attachment suitable for a range of beam profiles (I.e. INP, IPE, IPB) and can handle loads up to 5000kg.
  • Brand:: YALE
  • Product Code: Yale HTP Push travel Trolley
  • Availability: In Stock

Available Options

  • £60.30

Two size ranges are available to suit beam widths, the size A range isfor smaller beams up to 220mm and type B for beams up to 300mm wide.

Key Features of the Yale HTP Push travel Trolley

  • Easy to manually push & pull along the beam.
  • steel wheels.
  • Ball bearings pre-lubricated and encased for smooth operation.
  • Central clevis bar for easy adjustment to suit the beam size.
  • No creeping to either side.
  • Wheels are designed for a beam profile incline of 14%.
  • UVV and machinery directives met.

About the HTP Push Travel Beam Trolley

Fitting the trolley to a beam is relatively straightforward; you should allow between 1.0 & 2.5mm gaps between the wheel and beam flanges for optimum safety. There are three main components to the trolley for fitting, the clevis load bar, and two side plates which include the wheels.

Screw the adjusting load bar into the side plates one at a time until the bar just protrudes from the outer side. Additional spring washers and cylinder screws are needed for the type B trolleys (included).

Using the screw load pin, adjust the width to fit over the beam flange, when in position you can tighten up the side plates until the trolley fits correctly with the wheels in contact and with the correct spacing as stated above.

The load bar has a central lifting eye from where to fit your hoisting device, this must always be in the vertical position, never horizontal.

Extra Info & Ordering

 You can find the technical details in the table below. If you need additional information on any beam trolley you can contact the team on 01384 76961. When you are ready you can add to cart to make an online purchase.

Model HTP 500-A HTP 1000-A HTP 2000-A HTP 3000-A HTP 5000-A HTP 500-B HTP 1000-B HTP 2000-B HTP 3000-B HTP 5000-B
A, mm 77 82.5 98.5 114 132.5 92 97.5 113.5 129 147.5
D, mm 16 17 22 26 33 16 17 22 26 33
D1, mm 25 30 40 48 60 25 30 40 48 60
D2, mm 30 35 47 58 70 30 35 47 58 70
F1, mm 46 46 46 46 45.5 46 46 46 46 45.5
H1, mm 30.5 30.5 30.5 30 30 45.5 45.5 45.5 45 45
I (HTP), mm 71.5 71.5 95.5 131 142.5 71.5 71.5 95.5 131 142.5
L, mm 260 260 310 390 450 260 260 310 390 450
L1, mm 130 130 150 180 209 130 130 150 180 209
O, mm 60 60 80 112 125 60 60 80 112 125
P1, mm 168 168 168 168 168 168 168 168 168 168
P2, mm 146 150 155 160 167.5 146 150 155 160 167.5
L3, mm 346 346 396 476 556 346 346 396 476 556

Yale HTP Push travel Trolley dimensions

Capacity (WLL) KG Beam width mm  Weight KG Capacity (WLL) KG Beam width mm  Weight KG
Type ‘A’ Type ‘B’
500 50 - 220 8 500 160 - 300 10.6
1000 50 - 220 9 1000 160 - 300 12
2000 66 - 220 16 2000 160 - 300 19.3
3000 74 - 220 32 3000 180 - 300 35.8
5000 90 - 220 48 5000 180 - 300 52.2