As standard the BE200 hoist comes with a work positioning lever, an upper limit device for additional safety, a self-braking motor and an adjustable upper tie-rod. Scaffold clamps may be required to attach the hoist and tie-rod to the scaffolding. See images for the envisaged configuration. A trolley is available for use with a gantry if required.
Operating this scaffold hoist is easy thanks to the direct control pendant. There are three operating buttons including an emergency stop and it also has a 16a IP67 EC flying plug for ease of connection.
The BE200 builders scaffold hoist has a maximum working height of 30 metres with speeds of up to 20 metres a minute. The hoist includes a 31 metre quality steel wire rope which has a 5mm diameter and finishes with a quality safety hook for load security.
Along with the scaffold clamps as mentioned earlier, we can supply a great range of scaffold hoist accessories to compliment this or any other scaffold or gantry hoist. The range includes brick baskets, wheelbarrows, barrow slings, special props, a range of buckets and carriers and swivelling extension brackets.
If you need this type of hoist but don’t have scaffolding then check out the range of Imer gantry hoists which use a special gantry frame instead of a scaffold pole. We also supply, service and repair many other types of hoisting equipment.
Call 01384 76961 to speak to a member of the team here at Lifting Gear Direct, help and advice is on hand to answer any questions as well as supplying you with a very reasonable quote.
|Av. Full load lifting speed||m/min||20|
|Max. Working height||m/min||30|
|Wire rope diameter||mm||5|
|Motor power rate||kW||0.75|
|Motor running current||A||7.5|
|SPL in operator position||dB(A)||<74|
|packing dimensions w/l/h||mm||250/820/350|