My Cart
Low Profile Pad Hydraulic Cylinders

Low Profile Pad Hydraulic Cylinders

The low profile hydraulic cylinders are even lower than the shorty cylinder with stroke lengths between just 6 & 16mm.

Available Options

  • £104.84

 About the Low Height Cylinder

With fully retracted height between 40 & 100mm and extended heights between 46 & 116mm there is a model to suit many applications where there is only a small gap in which to slide the cylinder.

These hydraulic cylinders. may be small in size but they can still lift loads up to 150 tonnes thanks to the single action spring return action. However because of their much shorter stroke action, these cylinders should not be used for side loading.

You can find out the full specifications and measurements in the tables below.

Additional Hydraulic Equipment

When more than one cylinder is used you may need additional equipment such as an exchange manifold and extra couplers or hydraulic hoses. If you require these products then you can purchase them individually or together with your chosen cylinder.

Lifting Gear Direct also stock hydraulic floor jacks, pumps and bottle jacks to suit a wide range of industrial applications. You should also remember that although they are robust in nature they will need to undergo regular inspection to ascertain their safety in use.

Contact LGD 

Calling the team at LGD is as simple as dialling 01384 76961, a member or staff will swiftly answer your call and answer your questions or pass you to the right department.  An email can also be sent if you prefer.

 

 

 

Model Cyl. Cap. Stroke Piston Rod Dia. Plunger to Base Cylinder Dims Base to inlet port Weight Pump
  (tonne) (mm) E (mm) F (mm)  G (mm) H (mm) (kgs)  
TSLC-56 5 6 25 22 42 21 0.8 1B
TSLC-1011 10 11 38 29 56 21 1.5 1B
TSLC-2011 20 11 54 42 76 21 2.7 1B
TSLC-3013 30 13 64 48 95 21 4.2 1B
TSLC-5016 50 16 75 58 114 21 6.9 1C
TSLC-7516 75 16 85 70 140 21 11 1C
TSLC-10016 100 16 95 78 152 25 14.7 1C
TSLC-15016 150 16 115 97 190 24 25 1C

 

Model Cyl. Cap. Stroke Cyl. Effective Area Oil Cap. Retracted Height Extended Height Cyl. Out Dia. Cyl. Bore Dia.
  (tonne) (mm) (cm2)  (cc) A (mm) B (mm) C (mm) D (mm)
TSLC-56 5 6 6.16 3.7 40 46 60 28
TSLC-1011 10 11 15.2 16 45 56 85 44
TSLC-2011 20 11 28.3 31 52 63 102 60
TSLC-3013 30 13 41.85 53 59 72 115 73
TSLC-5016 50 16 60.8 99 67 83 139 88
TSLC-7516 75 16 103.87 164 79 95 165 115
TSLC-10016 100 16 126.7 203 86 102 180 127
TSLC-15016 150 16 201 317 100 116 215 160