Because this is a stationary lifting platform it is ideal for utilising along a production line or assembly line where the same task occurs at the same position. Commonly positioned at the start or end for easier loading and offloading or midway for stock checking.
This electric lift table is also great for maintenance, repair and restoration tasks where somewhat heavy loads can be raised to a height to make it more comfortable for the user to work on the item. The HTF-G 0.5 lift table would make a great addition to a workshop or car garage.
Using a 3 phase power supply the high pressure cylinders are operated via the control panel attached to the free standing 0.75kw motor. Loads of up to a maximum 500kg can be handled. Starting at the minimum table height of 80mm the table platform can be raised up smoothly to 760mm high. The rate at which the load is lifted varies according to the load and lowering down will be somewhat slower than lifting. You can find all the figures along with other technical data in the specification tale above.
These tables incorporate safety cut of bars on each side to provide optimum safety whilst in use.
If you need something similar, but this model is not quite right then fear not! Lifting Gear Direct have a great material handling collection of hydraulic lift platforms as well as mobile scissor lift tables to choose from. There is a choice of heights, platform sizes and lifting capacities so you are sure to find something to suit your needs.
|MAX. table Height||760mm|
|Min. table height||80mm|
|lifting time||18 seconds|
|lift speed with load||34mm /sec|
|lowering speed with load||75mm/sec|
|Safety cut off bars||all sides|