When you need to lift panel or frame type objects the logistics can be quite difficult. They are often large and heavy and not easy to manhandle. These panel lifting bags solve the issues accompanied with lifting this type of load.
Whether you need to lift solar panels, plasterboard or perhaps some large signage panels then a panel lifting bag would probably be your best solution.
Made with heavy duty materials in the UK you can be assured of a high quality product.
The open ended design of this lifting bag is one of its key features. Your panel/frame can be loaded and unloaded from either side which makes loading large heavy objects quick and easy. The open sides also remove pressure on the protruding valves on a solar panel.
There are two metal poles that run along the top sides of the bag to offer excellent structure to the bag and protection to its contents. These poles can also be utilized as carry handles.
At the base of the panel lifting bag you will find it is more padded than the rest of the side walls. This it to offer some cushioning to the load and outer protection against floor scrapes.
Lifting sling tunnels are in place, just like all our other lifting bags, to offer sling protection, easy inspection and most importantly keep the sling in the optimum position.
To hold the load within the bag there are double ring slings at each side of the bag. These incorporate adjustable buckles to enable easy opening of the bag at the side for loading/unloading and when fastened they can be pulled tight around the load to ensure total security of the contents. The bag extends to hold panels up to 2.4 metres by 1.2 metres. More than one panel can often be lifted in one go.
At the lower end of the bag there are 2 'D' rings which can be used to attach a tag line. These are great for helping to guide the bag throughout the lift, to keep it away from potential obstructions and minimise swinging of the load.
Building sites usually need to lift all manner of materials to a range of different heights. Certain objects are not so easy to lift but with a specific bag from the construction lifting bag range available at Lifting Gear Direct will alleviate many problems, including health and safety concerns.
We have bucket lifting bags for transporting things lice cement, water & small tools etc. Then we have a selection of tube/pole lifting bags for moving poles, pipes, wooden battens tubes and more. There is also a special plastic, lidded bucket which has a built in sling for transporting scaffold fittings and similar materials.
Get in touch if you need any help with your choice of lifting equipment, call 01384 76961.
Tags: solar panel lifting bag