The LGD push travel beam trolley can fit a range of ‘I’ beams with maximum widths of 220mm and minimum widths of just 50mm; you can find the exact sizes for each model in the table below. The beam trolley can be fitted to the lower flange of a standard ‘I’ beam which may be part of a fixed building structure or a beam on a crane. These trolleys are commonly used in warehouses, factories, garages and other industrial areas.
Our beam trolley can be adjusted to ensure it fits the beam securely. This is carried out by means of the central screw/equalizer pin which also consists of the lifting eye. The screw incorporates opposite threads at either end; one right handed and one left handed; when the screw it turned the clamp will tighten onto the beam. It is essential that the beam trolley fits securely and moves easily across the beam without slipping off. Always test the fit and movement without a load initially to ensure optimum safety. The wheels should sit comfortable on the flange of the beam with the outer wheel flange sitting just over the edge (about 6mm).
Once the trolley is fitted securely to the beam, it can be used for attaching a hoist, lifting loads and moving them across the length of the beam. The hoisting device can be fitted to the central eye on the screw pin with its top safety hook. Because this is a manual push travel trolley you will need to push the load which will, in turn move the trolley across the beam; always push, never pull!
If you would like to move loads across a beam with less effort, then one of our geared trolleys may suit you better. These are operated by pulling down on a chain which moves over gears to drive the trolley across the beam to which it is fitted. Powered trolley systems are also available; these are electrically controlled via a pendant or remote control.
Beam clamps are another form or attaching loads and hoisting devices to a beam although these are a static device and remain fixed in position until it is moved. We also have a range of girder clamps which can fit a wider range of beams.
If you need some more help with choosing the right kind of trolley or other beam attachment then you can discuss your requirements with one of our team on 01384 76961. Placing an order is easy too, tell us what you need to order over the phone, or you can use the new request a quote button. Alternatively email us with your details via the rapid enquiry form or contact us page.
|Capacity||I-Beam Width||Net Weight Kgs||A||B||C|