About the Workshop Floor Crane

This workshop floor crane is the NDJ10 model and is easy to move around the workplace thanks to its tough polyurethane wheels, two of which swivel to aid steering. One particular advantage to the NDJ10 floor crane is that it can be folded to quite a compact size, thus its easy to move out of the way when more space is needed and can be stored neatly with minimal floor space taken up.

NDJ10 Workshop Floor Crane Features

Once the floor crane has been unfolded the maximum beam height will be 2450mm. Bear in mind the height of the lower support legs which is 90mm, ensure they will fit under the load. (i.e. car engine bay). The minimum beam height is 1597mm.

The crane features a hydraulic pump which is the double acting type and thus enables quick and safe lifting. The hydraulic pump incorporates a safety valve and chrome plated piston.

The top beam incorporates three positions from which lift from. These are set at specific increments and have different safe lifting capacities at each point.

The first point is set at 1231mm and is for loads up to 700kg. The second point is set at 1381 and is for loads up to 800kg and the third and final lifting point is set at 1531mm and can handle the maximum 1000kg loads.

When folded down the dimensions are 1750 x 500 x 600mm, thus will take up minimal floor space.

Similar cranes

As well as the NDJ10 workshop crane we can also supply the Raptor SC engine crane which can handle heavier loads up to 2000kg, and also has 3 lifting positions.

Need something bigger? No problem, Lifting Gear Direct manufacture their own Swing Jib cranes and mobile lifting gantry systems and can be made to your specifications, so if you have the space and need extra lifting oomph then these types of crane will be worth a look.