Not only is this a fast working hoist it can also lift extremely high with maximum working heights at 50 metres. It can transport loads up to 150 kg on its 4mm diameter steel wire rope which comes complete with a load hook fitted with a safety catch to ensure all loads stay put.
This Imer scaffold hoist also boasts low noise levels so can be used without harm to the operator’s ears, it will also be less annoying to people nearby.
Other standard features on the Imer TR225 VN scaffold hoist are the work positioning lever, an IP67 plug; self braking motor and an extendible bracket up to 1120mm. The hoist also incorporates a multi-pin connector to enable the pendant control to be changed if required. It also features ARS upper and lower limit devices for additional safety.
There are numerous accessories available for use with scaffold hoists and gantry hoists, some can change the way they fit and some will make lifting certain materials much easier. Imagine how much effort and how much time it would take to carry 2 full mortar buckets up to a high level! Then look at the images and imagine how little time and effort would be needed if you were to use this builders scaffold hoist! It’s a no-brainer!
Other scaffold hoist accessories include a range of props, to enable the hoist to be fitted to different areas; multi-hooks, clamps, brick baskets, rubbish chutes and more.
For help, advice or just a quick quote you can phone 01384 76961 to speak to our sales team. You can also get in touch by email on the contacts page or rapid enquiry button.
|Av. Full load lifting speed||m/min||38|
|Max. Working height||m/min||50|
|Wire rope diameter||mm||4|
|Motor power rate||kW||1.3|
|Motor running current||A||10.1|
|SPL in operator position||dB(A)||<75|
|packing dimensions w/l/h||mm||350/820/550|