My Cart
Zinc Plated Wire Rope Winch

Zinc Plated Wire Rope Winch

This winch is wall mountable and Zinc plated with capacities ranging from 300 up to 1000kg.

Call 01384 76961 for price.

About the Zinc Plated Wire Rope Winch

This winch is easy to mount with a few M12 bolts, it is multi-positional with a compact and lightweight design to enable it to be mounted in almost any location.

The wire rope output can be in any direction; Sheave blocks can be used to enable better guiding of the rope to the suspension point.

The zinc plated design increases its corrosion protection and has an additional coating on the drum.

This is a highly efficient winch courtesy of the toothed spur wheel back gear which also provides easy and efficient handling.

The integrated crank handle has a load pressure brake to prevent unintentional overloading and holds the load firm.

There are 4 models available from LGD and have lifting capacities between 300kg and 1000kg.

 Other Winches

If this specific winch does not meet your requirements then take a look at the full range of manual wire rope winches where you may find a model to better suit your requirements.

Model   ALPHA300 ALPHA500 ALPHA750 ALPHA1000
A, mm 234 234 306 306
B, mm 262 262 337 337
C, mm 274 274 357 357
D, mm 203 203 265 265
E, mm 107 107 107 107
F, mm 194 194 194 194
G, mm 183 183 255 255
H Ø mm 63 63 63.5 63.5
I, mm 200 250 250 320
J, mm 58.6 58.6 92.5 92.5
K, mm 109.5 109.5 107 107

Zinc Plated Wire Rope Winch dimensions

MODEL Capacity   1st layer Capacity top layer Drum length Rope Diameter* Useable rope length 1st layer Useable rope length top layer Lift per crank rotation Required crank effort Weight without rope
  kg kg mm mm m m mm daN kg
ALPHA 300 300 130 50 5 1.3 28 57 13 10
ALPHA 500 500 230 50 6 1 20 55 17 10
ALPHA 750 750 270 50 7 1 26 45 17 16
ALPHA 1000 1000 360 50 7 1 26 45 18 16