This particular builders gantry hoist has a twin fall rather than a single fall like all the other HE models.
The hoist works together with the trestle type gantry frame which can be included in the kit or purchased individually. The frame incorporates two trestles and a runway beam which is 3 metres long; when the hoist is attached it will easily move across the beam to where it is required.
The gantry frame comes in a kit and also includes a set of non-slip rubber feet and 2 retaining strips. Ballast boxes are available separately.
The electric builders hoist comes with its own pendant control for easy operation and controls the lifting and lowering movements. Maximum lifting speeds are 11.5 metres per minute with a working length of 25 metres and a maximum length of 40 metres. The steel cable used is 5mm in diameter and contributes to the total weight of the hoist which is around 55kg.
Available in 220v or 110v with a single phase power supply this hoist can be used in numerous locations. Gantry hoists are commonly found on building sites and are perfect when no scaffold tower is available (when you would use a scaffold hoist instead).
Both scaffold hoist and gantry hoists can use similar accessories to enable easy lifting or particular materials. Check out our full range of gantry hoist accessories where you will find items like buckets and bucket carriers, brick baskets and wheelbarrow slings.
Call us on 01384 76961 to talk to our team about your lifting requirements, we can help you to put together everything you need into one complete package all at low prices, so there is no need to go elsewhere for other items. Too busy to talk to us? No problem! You can email us at your leisure here.
|HE500 MF Twin Fall
|220v / 110v
|Max. lifting capacity
|Average lifting speed
|Max. working length
|Steel cable diameter
|860 x 320 x 550 mm