Easily fitted to a counterbalanced gantry frame the ET500 builders hoist can handle loads up to 500 kg. Even at full load capacity this hoist can lift the load at an average 20 metres per minute up to its maximum working height of 42 metres thanks to the 5mm diameter 43 meter long wire rope.
The ET500 is a three phase electric hoist with a 400v/50Hz robust electric motor and is fitted with an IP67 plug for convenience.
Other benefits of this Imer gantry hoist include the self braking motor which has a magnetic device fitted and also a positioning brake comes as standard. There is an upper limit safety device to prevent over lifting and causing damage to the rope and potentially the load.
Operating the ET500 TF stand hoist from Imer couldn’t be simpler thanks to the direct pendant controller. This is IP rated at IP65 for safety and comes with a 1.5 metre cord as standard. The simplistic design has just three buttons and so it is straight forward to use and take your load where you need it to be with good precision.
There is an excellent range of accessories available to compliment the Imer gantry hoist, ranging from buckets and brick baskets to clamps, props and the full gantry frame and ballast boxes. So whether you need to lift or lower materials such as mortar or bricks it has never been easier, go to our special page to view the complete range of quality scaffold and gantry hoist accessories.
Need more information or advice, get in touch with our sales team on 01384 76961 to discuss your needs. You can also email us your enquiry via the rapid response button or the contact us page where your message will be answered as quickly as possible.
|ET 500 TF|
|Av. Full load lifting speed||m/min||20|
|Max. Working height||m/min||42|
|Wire rope diameter||mm||5|
|Motor power rate||kW||2.2 (400v/50-60Hz)|
|Motor running current||A||7|
|SPL in operator position||dB(A)||<72 (1.5m)|
|packing dimensions w/l/h||mm||380/810/420|